Last updated: April 22, 2026.
This guide explains how to manually perform a factory reset on Screenly MAX players using a keyboard.
Prerequisites
- A USB keyboard connected to the player
- Physical access to the device and display
Steps to Factory Reset
1. Access the boot menu: Restart the player. While the device is booting, repeatedly press the ESC key (similar to entering a BIOS menu) until the boot menu appears.
2. Select Install mode: From the menu, select Install using the arrow keys.
3. Confirm selection: Press Enter to proceed. The system will automatically begin the reset and reinstallation process.
After completion:
- The device will be reset to a clean state
- Screenly will be reinstalled
- You can proceed with the standard setup and pairing
Important Note
- Always select Install mode for a proper factory reset.
- Do not select the Factory Reset option from the menu, as it may lead to unexpected issues.
If the device does not respond to the ESC key or the menu does not appear, verify the keyboard connection and try again during boot.